Engine flush cleans the engine 100%
Kroon-Oil presents Flushing Oil Pro and Neutralizer Oil Pro, two unique products that promise to revolutionize engine cleaning procedures. These mighty solutions provide an efficient and quick cleaning process, complemented by a simple step-by-step plan that makes engine maintenance a breeze. You can achieve maximum results without a flushing machine with Flushing Oil Pro and Neutralizer Oil Pro. Furthermore, as every engine tends to accumulate pollutants and debris over time, Flushing Oil Pro and Neutralizer Oil Pro have been proven to be highly effective in restoring engines to their optimal performance levels.
Engine flush is not new, but what do we do differently?
Kroon-Oil is committed to providing the best engine cleaning solution. Unlike other brands that add a flushing agent to contaminated motor oil, we prioritize the removal of old, contaminated oil before using our Flushing Oil Pro. This product is a clean, low-viscosity motor oil that contains a powerful cleaning additive in the optimal ratio. It ensures that regardless of the crankcase capacity, the dosage of the cleaning additive is always correct for the best results.
After using Flushing Oil Pro, it's essential to rinse the engine with our Neutralizer Oil Pro to remove any remaining Flushing Oil Pro. This unique and highly effective cleaning method allows the new oil to be added only after rinsing with these two products. By following our step-by-step plan during rinsing, you can achieve a spotless result quickly.
Engine cleaning is a hot topic in automotive
Engine flushing has recently gained considerable attention due to modern engines' more stringent emission requirements. International regulations closely monitor compliance with stricter environmental and emission standards, which has led to the introduction of technological advancements that increase internal engine contamination.
Modern downsized engines are susceptible to pollution due to their 'new' driving technology. Using EGR systems to reduce NOx emissions further promotes internal engine pollution as some dirty exhaust gases are recirculated back into the engine. It is widely understood that such systems contribute to engine buildup. Additionally, the mandatory addition of biofuels harms engine cleanliness.
Motor flush can be simple yet effective
In addition to motor flushing with the PowerFlush® TPE flushing machine, Kroon-Oil now offers a second flushing method to help the professional get started. This more straightforward and faster method of rinsing the motor can also achieve very satisfactory results.
Even better results are obtained when flushing with the PowerFlush® TPE flushing machine in seriously internally polluted engines, as the oil is filtered further using microfilters. After an Engine Flush, the compression is restored, which reduces oil consumption, and the engine runs more economically and quietly again, even with typical problem engines.
Thorough internal engine cleaning can be achieved with Flushing Oil Pro, Neutralizer Oil Pro (available in cans, Bag-in-Box, and drums), new oil filters, and a series of simple steps. Rest assured that you'll get fantastic results.
Follow these steps
- Remove the oil drain plug, drain the used motor oil, and reinstall the drain plug.
- Fill the crankcase with the appropriate Kroon-Oil Flushing Oil Pro amount.
- Let the engine idle for 30 minutes, up to a maximum of 2500 RPM.
- Remove the old oil filter and install a new one.
- Drain all Kroon-Oil Flushing Oil Pro and refill with the appropriate amount of Kroon-Oil Neutralizer Oil Pro.
- Let the engine idle for 15 minutes, up to a maximum of 2500 RPM.
- Remove the old oil filter again and install a new one.
- Drain all Kroon-Oil Neutralizer Oil Pro.
- Fill the crankcase with the recommended amount of motor oil as prescribed on our website.
Note: These are the steps in brief. Before starting the flushing procedure, we advise you to read and follow the detailed instructions that provide all the necessary steps.
